Can I Use The Draw-Tite DT78MR To Replace The Factory Hitch On A 2023 Jeep Wrangler 4XE  

The only suspension enhancement we can recommend for your 2017 Jeep Wrangler Unlimited is the Timbren kit part #TJRJK with the spacers #A25723-90AH00. Since you have a 4 inch lift you'd need a total of 8 of the spacers. There isn't…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT78MR is a confirmed fit for a 2021 Jeep Wrangler Unlimited 4Xe.

If I'm not mistaken the 2017 Jeep Wrangler Unlimited Rubicon Recon uses the MOPAR off-road bumper #82213654. I've attached a picture for you to compare. If this is the case then the Draw-Tite #DT78MR will work just fine on your Jeep. I've…

The overall towing capacity of a vehicle is always limited to the lowest rated component in the setup as that would be the weak point that would fail first. So that begs the question of why are the hitches like the #DT78MR that fits your 2020 Jeep…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

You are correct that the Jeep bracket should have been reinstalled when installing the Blue Ox Base Plate #BX1139. I have linked another video near the bottom of the page where you can see the brackets being reinstalled on a 2020 Jeep Wrangler around…