Customers compare F142425 to these similar products
Products Featured in this Video
What's up everybody It's AJ with etrailer.com Today we're gonna be checking out the Fulton XLT 2 speed boat winch. We've got installed on the trailer already. And this is going to replace our old one, that was kind of worn out. This is gonna give us a few more options than the other one. Let's check it out. One thing that sets this one apart from the one that survived there.… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part #315-W2500D • Winch Stand,…
view full answer...Hardware is not included with the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap #F142418 that you referenced. You'd need to supply nuts and bolts that would work best with your mount plate and the winch.
view full answer...The weld-on mounting plate for the Fulton F2 Swing Up Jacks is part #F500277 and this plate's jack mounting holes are spaced at 4-1/2 inches horizontally and 3-7/8-inches vertically as shown in the linked photo. Feel free to submit a picture…
view full answer...If you measure the distance between the mounting holes on the bracket you have on your trailer, and they do not match the mounting holes on your F2 jack you may need to have the old bracket removed and use a mounting bracket like part #F500277 for…
view full answer...You can convert a single axle trailer to a tandem axle but it's more extensive than just putting the extra axle on there. The current axle does need to be repositioned for proper tongue weight. You will also need to cut off the current…
view full answer...Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure…
view full answer...Generally when picking out a winch for a boat trailer the ratio is 2 to 1 meaning you would need a winch with roughly half the capacity as the weight of the boat. With good rollers and a short winching distance the ratio increases to 3 to 1, but with…
view full answer...In regards to the Fulton XLT Bolt-Thru Swivel Trailer Jack part #F26ZR, the distance from the center of the mounting bracket to the top of the jack tube cap is 13.4". I have attached a photo below as well to show this. I spoke to Fulton and this…
view full answer...You are correct that Shelby is no longer in business. Based on my research it looks like your Shelby 5470A is a 2,800 pound hand winch. I wasn't able to locate the drum capacity on the 5470A but the Dutton-Lainson Hand Winch #DL15440 that you…
view full answer...That's a really unusual place for winch to bend/fail. I'd be willing to be the issue is that the angle of the winch's pull is not ideal. What degree is the winch pulling from relative to the winch plate direction? Parallel?
view full answer...Yes, the strap on the #315-W3200D can be installed so that it comes from the bottom instead of the top. However, doing so will reverse the switch and the direction you turn the handle for operation. The self-locking mechanism will work either way.…
view full answer...Whereas the Fulton #F142400 will work with just wire rope, like the #FWC3250100, the Fulton #F142401 will work with wire rope and also a strap, like the #FWS20HD0200. With both of these having a capacity of 2,000 ponds and being high performance 2…
view full answer...